Shop Home             

 

  

<Back To Product>

   
Interstain
Varnishes
Wood Stain

 
PRODUCT DESCRIPTION
A mahogany wood stain for staining brightwork and restoring colour to faded timber.
* Penetrating formulation
* Resistant to fade for interior and exterior use

 
PRODUCT INFORMATION
Colour YAA825-Mahogany
Finish Low sheen
Specific Gravity 0.95
Volume Solids 11% 
Typical Shelf Life 2 yrs
VOC (As Supplied) 521 g/lt
Unit Size 375 ml

 
DRYING/OVERCOATING INFORMATION

 
  Drying

 		 5ºC 15ºC 23ºC 35ºC

 
Touch Dry [ISO] 3hrs 2hrs 1hrs 30mins

 		  
  Overcoating
  Substrate Temperature
  5ºC 15ºC 23ºC 35ºC
Overcoated By Min Max Min Max Min Max Min Max

 
Dex 1+2  4hrs  -  3hrs  -  2hrs  -  1hrs  -
Goldspar  4hrs  -  3hrs  -  2hrs  -  1hrs  -
Goldspar Satin  4hrs  -  3hrs  -  2hrs  -  1hrs  -
Interstain  4hrs  -  3hrs  -  2hrs  -  1hrs  -
Original  4hrs  -  3hrs  -  2hrs  -  1hrs  -
Schooner  4hrs  -  3hrs  -  2hrs  -  1hrs  -

 

 		 Note:For all two-pack products, including Epiglass HT9000, allow 2-3 days before overcoating.
APPLICATION AND USE
Preparation Sand with 80-180 grade (grit) paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. Preserve, if required, with Intertox.

 
 
Method Apply one or more coats as required for colour. Finish with International Varnishes or Epiglass HT9000 Epoxy Resin.

 
 
Hints Mixing Stir or shake thoroughly.
Thinner YTA800 Thinners No.1
Cleaner YTA800 Thinners No.1

 
 
Some Important Points Product temperature should be minimum 10°C and maximum 35°C. Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F.

 
 
Compatibility/Substrates Suitable for all types of wood. Only use on bare wood. Can be mixed with all International varnishes to give a darker tint. Interstain can also be used with Interfill 100 Wood Filler.

 
 
Number of Coats 1-3 as required

 
 
Coverage (Theoretical) - 13.00 (m²/lt) 8-18 m²/lt depending on porosity of wood.

 
 
Recommended DFT
 
Application Methods Brush . Also cloth and pad

 
TRANSPORTATION,STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Interstain to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
Interstain should be kept in securely closed containers during transport and storage.
 

 		  
Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Interstain cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.
 

 
IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal or injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.

 		 and International are registered trademarks of Akzo Nobel.
 
 		 Ref:
Issue Date:
Supersedes:		 05000095
14-Feb-2003
28-Nov-2002

<Back To Product>